Feet for barriers, fall prevention, blanking units, delineator posts

Description:

K1 TDC delineator feet:

• 28.5 kg
• With rectangular holes for traffic signs

" NEW MULTI K1 footplate"

- Can you get any better than the K 1 footplate?
- Yes, you can!

The new "K1 multi footplate" from H.M.R. is the progression of a well-known product. It has been optimised in many areas and offers excellent product features. In addition, the new footplate offers a variety of uses in a variety of applications due to its clever design.

Product features and benefits at a glance:

• Centrally-mounted safety mechanism for delineator posts
• Also available without a safety mechanism(safeguard/fuse can be retrofitted)
• Can also be mounted in holes 2 and 3 (see pictured safety mechanism 1)
• Locking mechanism for delineator posts in three places
• Holes A - F (6 in total) provided for fall protection devices and construction fences - If a barrier is to be mounted in front of a construction fence, the length of the individual elements can be adjusted using hole C. If you place the fall protection device in hole E + F, it will be in the middle of the"K1 multi footplate". The overhang of the "K1 multi footplate K 1" with fall protection on each side is only 175 mm. The law allows for a maximum of 250 mm.

The incomparable benefits of the K1 footplate at a glance:

• When mounting the fall protection device in hole E+F, it is also possible to mount a delineator post in hole 3.
• When mounting the fall protection device in hole D+F, it is also possible to mount a delineator post in hole 2. The approved overhang of 250 mm is not reached.
• When mounting the fall protection device in hole A+B there is a clear boundary for pedestrians. Trips and falls on the "K1 multi footplate" are therefore prevented. Usage under extreme wind conditions may make the use of a second "K1 multi footplate” necessary.
• Hole 4 is provided for locking a wooden post (60 x 60 mm).
• The handles 5+6 are diagonally recessed. This enables the "K1 multi footplate” to be easily centred and securely stacked.
• Despite the large battery compartment 7, the K1 multi footplate is balanced lengthwise, which gives it the benefits of an ergonomic carrying position.
• Thanks to the well thought out design, the "K1 multi footplate" only stands on the outer corner points. This means that a maximum tipping load is achieved.
• The "K1 multi footplate" is very stably built. It will also not break if a wheel loader or forklift is driven over it as a row of supporting feet remains in place.
• For larger quantities we also offer you the option of having your company logo embossed.