Splash-Image

Feet for barriers, fall prevention, blanking units, delineator posts

Description:

K1 TDC delineator feet:
  • 28.5 kg
  • With rectangular holes for traffic signs

" NEW MULTI K1 footplate"

- Can you get any better than the K 1 footplate?
- Yes, you can!

The new "K1 multi footplate" from H.M.R. is the progression of a well-known product. It has been optimised in many areas and offers excellent product features. In addition, the new footplate offers a variety of uses in a variety of applications due to its clever design.

Product features and benefits at a glance:
  • Centrally-mounted safety mechanism for delineator posts
  • Also available without a safety mechanism(safeguard/fuse can be retrofitted)
  • Can also be mounted in holes 2 and 3 (see pictured safety mechanism 1)
  • Locking mechanism for delineator posts in three places
  • Holes A - F (6 in total) provided for fall protection devices and construction fences - If a barrier is to be mounted in front of a construction fence, the length of the individual elements can be adjusted using hole C. If you place the fall protection device in hole E + F, it will be in the middle of the"K1 multi footplate". The overhang of the "K1 multi footplate K 1" with fall protection on each side is only 175 mm. The law allows for a maximum of 250 mm.

The incomparable benefits of the K1 footplate at a glance:
  • When mounting the fall protection device in hole E+F, it is also possible to mount a delineator post in hole 3.
  • When mounting the fall protection device in hole D+F, it is also possible to mount a delineator post in hole 2. The approved overhang of 250 mm is not reached.
  • When mounting the fall protection device in hole A+B there is a clear boundary for pedestrians. Trips and falls on the "K1 multi footplate" are therefore prevented. Usage under extreme wind conditions may make the use of a second "K1 multi footplate” necessary.
  • Hole 4 is provided for locking a wooden post (60 x 60 mm).
  • The handles 5+6 are diagonally recessed. This enables the "K1 multi footplate” to be easily centred and securely stacked.
  • Despite the large battery compartment 7, the K1 multi footplate is balanced lengthwise, which gives it the benefits of an ergonomic carrying position.
  • Thanks to the well thought out design, the "K1 multi footplate" only stands on the outer corner points. This means that a maximum tipping load is achieved.
  • The "K1 multi footplate" is very stably built. It will also not break if a wheel loader or forklift is driven over it as a row of supporting feet remains in place.
  • For larger quantities we also offer you the option of having your company logo embossed.
 

Images:

Products:

Gutenbergstraße 1, 59174 Kamen H.M.R. Handels GmbH info@hmr-gmbh.com +49 (0) 2307 - 994860
NewCondition
Feet for barriers, fall prevention, blanking units, delineator posts

Multi Footplate K 1

Item Code: 40.001 Add to favorites Multi Footplate K 1
asccording to TL setting-up device 97
With Lock plate for beaconsFeet for Barriers
Multi feetplate K 1 according to TL setting-up device 97
With Lock plate for beacons

The conical feet of the beacon anchored without game
No wobble, so that ther feet ist not high on the sand/gravel mountain hiking
Distance from the groundn is sufficient to allow wind/sand and water can be derived below.
The battery compartment is large enough to ensure that the batteriers are secured placed and not at the level to survive, as it calls for the legislature
Stack height only 100 mm, 2 large handles,
corner feet higher than mean feet no wobbling on uneven ground
Patent DE 20 2010 012 175.2
Patent DE 20 2010 012 630.4
Patent PCT/DE 2011 / 001676